Home About Us

Profile

Culture

Honor

Workshop

Organization

News

Industry News

Company News

Products

Electric Planer

Electric Drill

Impact Drill

Angle Grinder

Cut-off Machine

Hammer Drill

Electric Router

Circular Saw

Polishing Machine

Belt Sander

Die Grinder

Electric Blower


Hot Air Gun

Cordless Tools

Demolition Hammer

Miter Saw

Jig Saw

Electric Nail Gun

Trimmer

Finishing Sander

Vibrator

Petrol Breaker

High Pressure Washer

FAQ Contact

Contact

Feedback

+ After the angle grinder is connected to electricity, there is abnormal noise and does not rotate or rotates very slowly

1. The switch contacts are burned out, and the switch needs to be repaired or replaced.

2. If the mechanical part is stuck, check the mechanical part and correct it in time.

+ The motor does not run after the angle grinder is connected

1. The power supply may be cut off, and the power supply should be repaired immediately.

2. It may be that the joints are loose. Check whether all joints are in good condition.

3. If the switch is in poor contact or does not work, repair or replace the switch in time.

4. The brush does not touch the surface of the commutator, so replace the carbon brush.

 
PRODUCTS
Electric Planer
Electric Drill
Impact Drill
Angle Grinder
Cut-off Machine
Hammer Drill
Electric Router
Circular Saw
Polishing Machine
Belt Sander
Die Grinder
 
Hot Air Gun
Cordless Tools
Demolition Hammer
Miter Saw
Jig Saw
Electric Nail Gun
Trimmer
Finishing Sander
Vibrator
Petrol Breaker
High Pressure Washer
 
 
CONTACT US


Add:NO.12,Hardware Road,Hardware & Machinery Industrial Area,

Wuyi,Zhejiang,China.

Mob:+86 130 9587 0178

Contacts:Sunny Zhou

E-mail:jhzqr@odeli.com

fbtools@odeli.com


 
 
       

Copyright ©  JINHUA OUDERLI TOOLS MANUFACTURE CO.,LTD                    浙ICP备15023588号                      Design by:www.579xd.com

Contact:13095870178

Scan and follow